dmesg - 2011-12-14 11:58
2008 LSI Corporation
[ 4.846498] Fusion MPT SPI Host driver 3.04.17
[ 4.846622] Fusion MPT FC Host driver 3.04.17
[ 4.846780] Fusion MPT SAS Host driver 3.04.17
[ 4.846937] Fusion MPT misc device (ioctl) driver 3.04.17
[ 4.847170] mptctl: Registered with Fusion MPT base driver
[ 4.847284] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 4.847349] Fusion MPT LAN driver 3.04.17
[ 4.847526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.847661] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.847751] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 4.847893] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.852092] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 4.852237] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.852397] ehci_hcd 0000:00:12.2: debug port 1
[ 4.852480] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf034c000
[ 4.858061] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.858169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.858235] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.858373] usb usb1: Product: EHCI Host Controller
[ 4.858437] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
[ 4.858501] usb usb1: SerialNumber: 0000:00:12.2
[ 4.858838] hub 1-0:1.0: USB hub found
[ 4.858951] hub 1-0:1.0: 5 ports detected
[ 4.859373] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.859465] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.859680] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.865104] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 4.865253] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.865410] ehci_hcd 0000:00:13.2: debug port 1
[ 4.865486] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf034a000
[ 4.871079] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.871186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.871251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.871387] usb usb2: Product: EHCI Host Controller
[ 4.871450] usb usb2: Manufacturer: Linux 2.6.37.6 ehci_hcd
[ 4.871513] usb usb2: SerialNumber: 0000:00:13.2
[ 4.871932] hub 2-0:1.0: USB hub found
[ 4.872050] hub 2-0:1.0: 5 ports detected
[ 4.872370] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.872461] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 4.872710] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 4.877109] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 4.877256] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.877416] ehci_hcd 0000:00:16.2: debug port 1
[ 4.877494] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0348000
[ 4.883076] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 4.883180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.883246] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.883384] usb usb3: Product: EHCI Host Controller
[ 4.883448] usb usb3: Manufacturer: Linux 2.6.37.6 ehci_hcd
[ 4.883512] usb usb3: SerialNumber: 0000:00:16.2
[ 4.883976] hub 3-0:1.0: USB hub found
[ 4.884104] hub 3-0:1.0: 4 ports detected
[ 4.884595] 116x: driver isp116x-hcd, 03 Nov 2005
[ 4.884799] driver isp1362-hcd, 2005-04-04
[ 4.884944] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.885106] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.885199] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 4.885370] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 4.893128] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf034d000
[ 4.948104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.948170] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.948308] usb usb4: Product: OHCI Host Controller
[ 4.948372] usb usb4: Manufacturer: Linux 2.6.37.6 ohci_hcd
[ 4.948436] usb usb4: SerialNumber: 0000:00:12.0
[ 4.948964] hub 4-0:1.0: USB hub found
[ 4.949103] hub 4-0:1.0: 5 ports detected
[ 4.949557] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.949652] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.949917] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4.956093] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf034b000
[ 5.011265] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.011381] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.011519] usb usb5: Product: OHCI Host Controller
[ 5.011583] usb usb5: Manufacturer: Linux 2.6.37.6 ohci_hcd
[ 5.011648] usb usb5: SerialNumber: 0000:00:13.0
[ 5.012191] hub 5-0:1.0: USB hub found
[ 5.012315] hub 5-0:1.0: 5 ports detected
[ 5.012725] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.012821] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 5.013046] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 5.019080] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0349000
[ 5.074266] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.074382] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.074520] usb usb6: Product: OHCI Host Controller
[ 5.074584] usb usb6: Manufacturer: Linux 2.6.37.6 ohci_hcd
[ 5.074648] usb usb6: SerialNumber: 0000:00:16.0
[ 5.076139] hub 6-0:1.0: USB hub found
[ 5.076254] hub 6-0:1.0: 4 ports detected
[ 5.076665] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.077140] sl811: driver sl811-hcd, 19 May 2005
[ 5.077291] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 5.077638] Initializing USB Mass Storage driver...
[ 5.077812] usbcore: registered new interface driver usb-storage
[ 5.077922] USB Mass Storage support registered.
[ 5.078058] usbcore: registered new interface driver ums-alauda
[ 5.078188] usbcore: registered new interface driver ums-cypress
[ 5.078337] usbcore: registered new interface driver ums-datafab
[ 5.078491] usbcore: registered new interface driver ums-freecom
[ 5.078639] usbcore: registered new interface driver ums-isd200
[ 5.078790] usbcore: registered new interface driver ums-jumpshot
[ 5.078939] usbcore: registered new interface driver ums-karma
[ 5.079046] usbcore: registered new interface driver ums-onetouch
[ 5.079208] usbcore: registered new interface driver ums-sddr09
[ 5.079368] usbcore: registered new interface driver ums-sddr55
[ 5.079518] usbcore: registered new interface driver ums-usbat
[ 5.086358] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.102886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.102958] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.103340] mice: PS/2 mouse device common for all mice
[ 5.103565] md: linear personality registered for level -1
[ 5.103679] md: raid0 personality registered for level 0
[ 5.103741] md: raid1 personality registered for level 1
[ 5.103804] md: raid10 personality registered for level 10
[ 5.103867] md: raid6 personality registered for level 6
[ 5.103929] md: raid5 personality registered for level 5
[ 5.103993] md: raid4 personality registered for level 4
[ 5.104066] md: multipath personality registered for level -4
[ 5.104314] device-mapper: uevent: version 1.0.3
[ 5.104706] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 5.105071] cpuidle: using governor ladder
[ 5.105138] cpuidle: using governor menu
[ 5.105271] input: Speakup as /devices/virtual/input/input0
[ 5.105412] speakup 3.1.6: initialized
[ 5.105479] synth name on entry is: (null)
[ 5.105623] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 5.105833] TCP cubic registered
[ 5.105943] Initializing XFRM netlink socket
[ 5.106033] NET: Registered protocol family 17
[ 5.106114] Registering the dns_resolver key type
[ 5.113123] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.123040] registered taskstats version 1
[ 5.123490] md: Waiting for all devices to be available before autodetect
[ 5.123602] md: If you don't use raid, use raid=noautodetect
[ 5.123923] md: Autodetecting RAID arrays.
[ 5.124042] md: Scanned 0 and added 0 devices.
[ 5.124104] md: autorun ...
[ 5.124166] md: ... autorun DONE.
[ 5.158381] EXT3-fs (sda6): error: couldn't mount because of unsupported optional features (240)
[ 5.159125] EXT2-fs (sda6): error: couldn't mount because of unsupported optional features (240)
[ 5.175949] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.176205] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[ 5.193832] devtmpfs: mounted
[ 5.193969] Freeing unused kernel memory: 772k freed
[ 5.194207] Write protecting the kernel read-only data: 16384k
[ 5.194648] Freeing unused kernel memory: 1360k freed
[ 5.195315] Freeing unused kernel memory: 1140k freed
[ 5.263253] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 5.497248] usb 1-3: New USB device found, idVendor=058f, idProduct=a001
[ 5.497336] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 5.497404] usb 1-3: Product: HP Webcam-101
[ 5.497468] usb 1-3: Manufacturer: DC01702LOALGKC
[ 5.733035] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 5.881119] usb 4-1: New USB device found, idVendor=0d8c, idProduct=0103
[ 5.881242] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.881310] usb 4-1: Product: USB Sound Device
[ 5.881375] usb 4-1: Manufacturer: C-Media INC.
[ 6.560059] udev[1263]: starting version 165
[ 7.061840] wmi: Mapper loaded
[ 7.143805] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.143988] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.229254] ACPI: acpi_idle registered with cpuidle
[ 7.242531] ACPI: AC Adapter [ACAD] (off-line)
[ 7.242722] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.242965] ACPI: Power Button [PWRB]
[ 7.243154] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.245219] ACPI: Lid Switch [LID]
[ 7.245393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.245622] ACPI: Power Button [PWRF]
[ 7.253802] acpi device:01: registered as cooling_device2
[ 7.254006] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 7.254194] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.262258] [Firmware Bug]: Invalid critical threshold (0)
[ 7.264138] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.264209] ACPI: Thermal Zone [THRM] (41 C)
[ 7.288668] Linux agpgart interface v0.103
[ 7.464366] shpchp 0000:00:04.0: HPC vendor_id 1022 device_id 1709 ss_vid 1022 ss_did 1234
[ 7.464561] shpchp 0000:00:04.0: Cannot reserve MMIO region
[ 7.464635] shpchp 0000:00:05.0: HPC vendor_id 1022 device_id 170a ss_vid 1022 ss_did 1234
[ 7.464730] shpchp 0000:00:05.0: Cannot reserve MMIO region
[ 7.464802] shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 170b ss_vid 1022 ss_did 1234
[ 7.464896] shpchp 0000:00:06.0: Cannot reserve MMIO region
[ 7.465164] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.512928] ACPI: Battery Slot [BAT0] (battery present)
[ 7.546022] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0x0b00-0x0b0f pref window disabled]
[ 7.546169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.708169] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.708310] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.708441] r8169 0000:02:00.0: setting latency timer to 64
[ 7.708446] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 7.708675] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 7.708788] r8169 0000:02:00.0: eth0: RTL8101e at 0xffffc9000007e000, 2c:27:d7:ec:39:3b, XID 00a00000 IRQ 41
[ 7.735889] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 7.751366] rtc_cmos 00:05: RTC can wake from S4
[ 7.755165] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 7.755307] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 7.782628] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 7.914454] Initializing Realtek PCIE storage driver...
[ 7.914603] --- 11.12.05.23.33 ---
[ 7.914682] rts_pstor 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.914879] Resource length: 0x1000
[ 7.915031] Original address: 0xf0100000, remapped address: 0xffffc9000004e000
[ 7.915149] pci->irq = 18
[ 7.915214] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 7.915292] rts_pstor 0000:03:00.0: setting latency timer to 64
[ 7.915298] scsi4 : SCSI emulation for PCI-Express Mass Storage devices
[ 8.113738] cfg80211: Calling CRDA to update world regulatory domain
[ 8.117171] rts_pstor: waiting for device to settle before scanning
[ 8.570230] usbcore: registered new interface driver snd-usb-audio
[ 8.633670] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.633863] Disabling lock debugging due to kernel taint
[ 8.655439] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 8.697503] [fglrx] Maximum main memory to use for locked dma buffers: 3271 MBytes.
[ 8.697719] [fglrx] vendor: 1002 device: 9648 count: 1
[ 8.698420] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 8.698545] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.698613] pci 0000:00:01.0: setting latency timer to 64
[ 8.699265] [fglrx] Kernel PAT support is enabled
[ 8.699394] [fglrx] module loaded - fglrx 8.92.6 [Nov 9 2011] with 1 minors
[ 8.808213] Linux video capture interface: v2.00
[ 8.831465] rtl8192ce 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.831614] rtl8192ce 0000:01:00.0: setting latency timer to 64
[ 8.956575] cfg80211: Calling CRDA for country: EC
[ 9.075159] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.075330] rtlwifi: wireless switch is on
[ 9.117310] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 9.117700] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 9.117968] Bad LUN (0:1)
[ 9.118065] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9.118355] Bad target number (1:0)
[ 9.118654] Bad target number (2:0)
[ 9.118809] Bad target number (3:0)
[ 9.119615] Bad target number (4:0)
[ 9.119759] Bad target number (5:0)
[ 9.119854] Bad target number (6:0)
[ 9.119963] Bad target number (7:0)
[ 9.120078] rts_pstor: device scan complete
[ 9.139643] uvcvideo: Found UVC 1.00 device HP Webcam-101 (058f:a001)
[ 9.142703] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input8
[ 9.142864] usbcore: registered new interface driver uvcvideo
[ 9.142932] USB Video Class driver (v1.0.0)
[ 9.154969] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.155172] HDA Intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 9.155196] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 9.294833] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.348636] input: HD-Audio Generic Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 9.348981] input: HD-Audio Generic HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 9.413018] cfg80211: Regulatory domain changed to country: EC
[ 9.413092] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.413186] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.413253] (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[ 9.413321] (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[ 9.413387] (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[ 9.721353] Adding 4652028k swap on /dev/sda5. Priority:-1 extents:1 across:4652028k
[ 10.338642] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 10.401058] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 11.469090] ppdev: user-space parallel port driver
[ 11.490298] lp: driver loaded but no devices found
[ 11.758343] powernow-k8: Found 1 AMD A4-3300M APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 11.758494] powernow-k8: Core Performance Boosting: on.
[ 11.758613] powernow-k8: 0 : pstate 0 (1900 MHz)
[ 11.758725] powernow-k8: 1 : pstate 1 (1800 MHz)
[ 11.758789] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 11.758854] powernow-k8: 3 : pstate 3 (1400 MHz)
[ 11.758919] powernow-k8: 4 : pstate 4 (1200 MHz)
[ 11.758983] powernow-k8: 5 : pstate 5 (1000 MHz)
[ 11.759057] powernow-k8: 6 : pstate 6 (800 MHz)
[ 15.148143] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 18.045199] r8169 0000:02:00.0: eth0: link down
[ 36.939400] NET: Registered protocol family 10
[ 36.939591] lo: Disabled Privacy Extensions
[ 36.939661] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.803159] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.834394] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.994049] r8169 0000:02:00.0: eth0: link down
[ 52.995175] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.697427] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 57.409934] wlan0: authenticate with 00:1b:8b:4b:90:4a (try 1)
[ 57.411539] wlan0: authenticated
[ 57.411574] wlan0: associate with 00:1b:8b:4b:90:4a (try 1)
[ 57.414083] wlan0: RX AssocResp from 00:1b:8b:4b:90:4a (capab=0x411 status=0 aid=2)
[ 57.414090] wlan0: associated
[ 57.415401] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.739916] [fglrx] ATIF platform detected with notification ID: 0x81
[ 60.733968] fglrx_pci 0000:00:01.0: irq 43 for MSI/MSI-X
[ 60.734739] [fglrx] Firegl kernel thread PID: 2219
[ 60.734921] [fglrx] Firegl kernel thread PID: 2220
[ 60.735088] [fglrx] Firegl kernel thread PID: 2221
[ 60.735170] [fglrx] IRQ 43 Enabled
[ 61.100978] [fglrx] Gart USWC size:1072 M.
[ 61.100986] [fglrx] Gart cacheable size:424 M.
[ 61.100998] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 61.101020] [fglrx] Reserved FB block: Unshared offset:fca5000, size:35b000
[ 61.101026] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 68.098019] wlan0: no IPv6 routers present
[ 329.586295] ata1.00: configured for UDMA/100
[ 329.586305] ata1: EH complete
[ 329.729567] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 329.737571] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 9188.586596] ata1.00: configured for UDMA/100
[ 9188.586609] ata1: EH complete
[ 9188.689863] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 9188.699896] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 9189.135979] wlan0: deauthenticating from 00:1b:8b:4b:90:4a by local choice (reason=3)
[ 9189.164077] cfg80211: Calling CRDA to update world regulatory domain
[ 9189.171592] cfg80211: World regulatory domain updated:
[ 9189.171600] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9189.171608] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9189.171615] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9189.171620] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9189.171626] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9189.171632] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9189.526128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9189.584723] r8169 0000:02:00.0: eth0: link down
[ 9189.585886] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9189.950420] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9190.323497] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9190.375326] r8169 0000:02:00.0: eth0: link down
[ 9190.376438] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9192.975406] PM: Syncing filesystems ... done.
[ 9192.979674] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9192.991148] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9193.002342] Suspending console(s) (use no_console_suspend to debug)
[ 9193.499405] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9193.499539] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 9193.499608] i8042 kbd 00:07: wake-up capability enabled by ACPI
[ 9193.499642] sd 0:0:0:0: [sda] Stopping disk
[ 9193.499724] Ready to suspend
[ 9193.500095] rtl8192ce 0000:01:00.0: PCI INT A disabled
[ 9193.500242] ehci_hcd 0000:00:16.2: PCI INT B disabled
[ 9193.500261] ohci_hcd 0000:00:16.0: PCI INT A disabled
[ 9193.500823] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 9193.500843] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 9193.500867] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 9193.500873] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 9193.501075] [fglrx] IRQ 43 Disabled
[ 9193.501145] [fglrx] Preparing suspend fglrx in kernel.
[ 9193.602093] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 9193.602187] HDA Intel 0000:00:01.1: PCI INT B disabled
[ 9193.602228] ACPI handle has no context!
[ 9193.694200] [fglrx] Suspending fglrx in kernel completed.
[ 9193.694207] [fglrx] Power down the ASIC .
[ 9194.499137] rts_pstor 0000:03:00.0: PCI INT A disabled
[ 9194.510242] PM: suspend of devices complete after 1507.490 msecs
[ 9194.510603] r8169 0000:02:00.0: PME# enabled
[ 9194.510621] pci 0000:00:05.0: wake-up capability enabled by ACPI
[ 9194.554332] PM: late suspend of devices complete after 44.083 msecs
[ 9194.554574] ACPI: Preparing to enter system sleep state S3
[ 9195.064129] PM: Saving platform NVS memory
[ 9195.081513] Disabling non-boot CPUs ...
[ 9195.094265] CPU 1 is now offline
[ 9195.094270] SMP alternatives: switching to UP code
[ 9195.110546] Back to C!
[ 9195.110546] PM: Restoring platform NVS memory
[ 9195.110546] Enabling non-boot CPUs ...
[ 9195.110546] SMP alternatives: switching to SMP code
[ 9195.119070] Booting Node 0 Processor 1 APIC 0x1
[ 9195.222528] CPU1 is up
[ 9195.222656] ACPI: Waking up from system sleep state S3
[ 9195.260485] fglrx_pci 0000:00:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9195.260511] fglrx_pci 0000:00:01.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403)
[ 9195.260559] HDA Intel 0000:00:01.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 9195.260581] HDA Intel 0000:00:01.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[ 9195.260613] pci 0000:00:04.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9195.260625] pci 0000:00:04.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[ 9195.260635] pci 0000:00:04.0: restoring config space at offset 0x7 (was 0x20003131, writing 0x3131)
[ 9195.260676] pci 0000:00:05.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 9195.260690] pci 0000:00:05.0: restoring config space at offset 0x7 (was 0x20002121, writing 0x2121)
[ 9195.260731] pci 0000:00:06.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9195.260740] pci 0000:00:06.0: restoring config space at offset 0xc (was 0xffff, writing 0x0)
[ 9195.260748] pci 0000:00:06.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[ 9195.260756] pci 0000:00:06.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf041f041)
[ 9195.260844] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 9195.260872] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407)
[ 9195.260912] ohci_hcd 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9195.260958] ehci_hcd 0000:00:12.2: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 9195.260987] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 9195.261021] ohci_hcd 0000:00:13.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9195.272079] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf034a000-0xf034a0ff] (PCI address [0xf034a000-0xf034a0ff])
[ 9195.272099] ehci_hcd 0000:00:13.2: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 9195.272128] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 9195.272186] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 9195.272215] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 9195.283073] ehci_hcd 0000:00:16.2: BAR 0: set to [mem 0xf0348000-0xf03480ff] (PCI address [0xf0348000-0xf03480ff])
[ 9195.283113] ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 9195.283327] rtl8192ce 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[ 9195.294056] r8169 0000:02:00.0: restoring config space at offset 0xb (was 0x813610ec, writing 0x3566103c)
[ 9195.294080] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 9195.294177] rts_pstor 0000:03:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[ 9195.294360] PM: early resume of devices complete after 33.973 msecs
[ 9195.294535] fglrx_pci 0000:00:01.0: setting latency timer to 64
[ 9195.294601] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9195.294611] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 9195.294658] HDA Intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 9195.294856] pci 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9195.294864] pci 0000:00:04.0: setting latency timer to 64
[ 9195.294878] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9195.294886] pci 0000:00:05.0: setting latency timer to 64
[ 9195.294898] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9195.294906] pci 0000:00:06.0: setting latency timer to 64
[ 9195.295025] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9195.295123] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9195.295158] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9195.295187] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9195.295222] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9195.295268] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9195.295296] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9195.295350] rtl8192ce 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9195.295364] rtlwifi: wireless switch is on
[ 9195.295385] pci 0000:00:05.0: wake-up capability disabled by ACPI
[ 9195.295393] r8169 0000:02:00.0: PME# disabled
[ 9195.295791] Ready to resume
[ 9195.295805] rts_pstor 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9195.295813] rts_pstor 0000:03:00.0: setting latency timer to 64
[ 9195.295820] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 9195.295871] sd 0:0:0:0: [sda] Starting disk
[ 9195.296383] [fglrx] Power up the ASIC
[ 9195.296488] [fglrx] Preparing resume fglrx in kernel.
[ 9195.305351] [fglrx] Resuming fglrx in kernel completed.
[ 9195.305440] [fglrx] IRQ 43 Enabled
[ 9195.315323] r8169 0000:02:00.0: eth0: link down
[ 9195.556336] i8042 kbd 00:07: wake-up capability disabled by ACPI
[ 9195.560232] usb 1-3: reset high speed USB device using ehci_hcd and address 3
[ 9195.755254] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9195.776351] ata2.00: configured for UDMA/100
[ 9196.520388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9196.522167] ata1.00: configured for UDMA/100
[ 9197.020912] PM: resume of devices complete after 1726.456 msecs
[ 9197.022102] Restarting tasks ... done.
[ 9197.045255] video LNXVIDEO:00: Restoring backlight state
[ 9199.656441] ata1.00: configured for UDMA/100
[ 9199.656452] ata1: EH complete
[ 9199.763973] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 9199.771097] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 9200.989540] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9201.042454] r8169 0000:02:00.0: eth0: link down
[ 9201.043743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9201.428956] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9204.067601] wlan0: authenticate with 00:1b:8b:4b:90:4a (try 1)
[ 9204.069217] wlan0: authenticated
[ 9204.069333] wlan0: associate with 00:1b:8b:4b:90:4a (try 1)
[ 9204.072550] wlan0: RX AssocResp from 00:1b:8b:4b:90:4a (capab=0x411 status=0 aid=2)
[ 9204.072557] wlan0: associated
[ 9204.074002] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9205.751695] ata1.00: configured for UDMA/100
[ 9205.751703] ata1: EH complete
[ 9206.004837] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 9206.012249] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 9214.274021] wlan0: no IPv6 routers present
[10726.758163] [fglrx] IRQ 43 Disabled
[10737.061077] pci 0000:00:01.0: PCI INT A disabled
[10737.061116] [fglrx] module unloaded - fglrx 8.92.6 [Nov 9 2011]
[10739.648606] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input11
[10739.648750] ACPI: Power Button [PWRB]
[10739.648910] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input12
[10739.649961] ACPI: Lid Switch [LID]
[10739.650215] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
[10739.650297] ACPI: Power Button [PWRF]
[10739.662894] Linux agpgart interface v0.103
[10739.735177] [fglrx] Maximum main memory to use for locked dma buffers: 3271 MBytes.
[10739.735209] [fglrx] vendor: 1002 device: 9648 count: 1
[10739.735833] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[10739.735848] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[10739.735855] pci 0000:00:01.0: setting latency timer to 64
[10739.736665] [fglrx] Kernel PAT support is enabled
[10739.736688] [fglrx] module loaded - fglrx 8.92.6 [Nov 9 2011] with 1 minors
[10742.772458] [fglrx] ATIF platform detected with notification ID: 0x81
[10743.706063] fglrx_pci 0000:00:01.0: irq 43 for MSI/MSI-X
[10743.706851] [fglrx] Firegl kernel thread PID: 10175
[10743.707083] [fglrx] Firegl kernel thread PID: 10176
[10743.707315] [fglrx] Firegl kernel thread PID: 10177
[10743.707437] [fglrx] IRQ 43 Enabled
[10743.835581] [fglrx] Gart USWC size:1072 M.
[10743.835584] [fglrx] Gart cacheable size:424 M.
[10743.835589] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[10743.835591] [fglrx] Reserved FB block: Unshared offset:fca5000, size:35b000
[10743.835593] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000